Philips Pronto Home Theater Control Panel TSU3500 - Manual (Page 46)

User Guide
46
Using the Power Features
Defining the Repeat Settings
If you want the timer to repeat itself on more than one occasion, you can use the
repeat settings.
1 In the ‘Editing Timer’ screen, tap the button.
The ‘Repeat Settings’ screen appears.
2 Tap the repeat toggle button .
By default ‘No’ is selected.
The Repeat button toggles between the three settings:
■ No: This is the default setting;
■ Daily;
■ Weekly.
1 To change the setting to ‘Daily’, tap the button again.
Every day of the week is automatically selected.
2 If you want to set an end date for the repeating timer, select the
End Date check box.
The End Date is enabled.
3 Define the End Date, as described in ‘Setting the Start Date’ on
page 44.
The End Date is defined.
-or-
1 To change the setting to ‘Weekly’, tap the button again.
The current day is selected.
2 Select or deselect the different days of the week on which the
timer has to be executed.
Repeat toggle
ProntoNG_0705_ML_1EN.qxd 22-08-2005 10:57 Pagina 46