Philips Pronto Home Theater Control Panel TSU3500 - Manual (Page 21)

User Guide
21
EN
Customizing Pronto
Selecting the brand
1 Tap the Scroll Down button or the Scroll Up button next to the
Brands list.
The Brands list scrolls down/up.
Note You can also select the brand via the virtual keyboard by tapping one or more
of the brand’s name characters.
2 Tap the brand for the selected Device in the Brands list.
3 Tap in the ‘Brands’ screen.
If there is only one code set, the ‘Installing the Brand’ screen appears.
Go to ‘Installing the brand’ below.
-or-
If there is more than one possible code set, a message screen appears.
4 Tap .
The ‘Code sets’ screen appears.
Selecting the code set
1 If necessary, tap the Scroll Down button or the
Scroll Up button next to the Code Sets list.
The Code Sets list scrolls down/up.
2 Tap the code set for the selected Device in the Code Sets list.
3 Tap in the ‘Code Sets’ screen.
The ‘Installing the Brand’ screen appears.
Installing the brand
1 Tap in the ‘Installing the Brand’ screen.
The first Page of the selected Device appears.
2 Tap different buttons to see if the device is responding to the IR codes
for the selected brand and code set.
3 Press the left firm key, labeled .
The ‘Installing the Brand’ screen appears again.
4 Tap in the ‘Installing the Brand’ screen.
The IR codes for the selected brand and code set are installed.
ProntoNG_0705_ML_1EN.qxd 22-08-2005 10:57 Pagina 21