Philips Pronto Home Theater Control Panel TSU3500 - Manual (Page 41)

User Guide
41
EN
Creating and Editing Timers
With the Timer Tool you can define actions to be carried out at predefined times.
For instance, you can switch on the lights or program your VCR to record your
favorite daily TV-show.
Note When a timer is executed, you will hear a beep and a Timer message appears on
screen.
If Pronto is performing another task (sending out IR codes, testing a macro, ...)
when a timer is due to be executed, Pronto first continues performing the current
task.
Creating and Editing Timers
Adding a Timer
1 Tap and hold the Pronto icon in the upper left corner of the touch
screen for 3 seconds. The Tools Menu appears.
2 Tap in the Tools Menu.
The ‘Timer Tool’ information screen appears.
3 Tap .
The ‘Timer’ screen appears.
4 In the ‘Timer’ screen, tap to add a
new timer to the list.
A new timer is added to the Timers list.
By default a new timer is labeled Timer and a
number. It has no start and stop actions defined.
5 To label the timer, tap , as described
in ‘Labeling a Timer’ on page 42.
6 To define the start and stop actions for the timer, tap , as
described in ‘Editing a Timer’ on page 43.
7 In the ‘Timer’ screen, tap .
The ‘Timer’ screen closes and the Tools Menu appears again. The timer is
added.
-or-
In the ‘Timer’ screen, tap .
The Timer screen closes without adding the timer.
Using the Power Features
ProntoNG_0705_ML_1EN.qxd 22-08-2005 10:57 Pagina 41