Philips Pronto Home Theater Control Panel TSU3500 - Manual (Page 36)

User Guide
36
Customizing Pronto
4 Tap the upper right corner on the touch screen.
5 Tap the lower left corner on the touch screen.
The touch screen is calibrated.
Adjusting the Screen Activation Settings
In the third Settings Page you can adjust the screen activation settings. You can
define when or if you want the LCD backlight to be activated. You can also set
when or if you want the Pronto to send out IR codes or perform button actions.
You can adjust the following screen activation settings:
■ Firm keys settings;
■ Cursor keys settings.
Tip You can adjust the timeout for the LCD backlight. For more information, see
Setting the Timeout of the LCD Screen on page 34.
Adjusting the Firm Keys Settings
You can set the firm keys settings to 3 different states. The firm keys are located
below the touch screen of your Pronto.
To adjust the firm keys settings of the Pronto, tap in the
third Settings Page. You can now toggle between the following 3 firm keys states:
■ : This setting implies that when you press one of the 4 firm keys, your
Pronto will send out the IR code or perform the action assigned to this key.
The LCD backlight will not be activated when pressing a firm key.
■ : This setting implies that when you press one of the 4 firm keys, the
LCD backlight will be activated and your Pronto will send out the IR code or
perform the action assigned to this key.
■ : This is the default setting of your Pronto. It implies that when you press
one of the 4 firm keys, the LCD backlight will be activated.
The Pronto will not send out an IR code nor perform the button action.
ProntoNG_0705_ML_1EN.qxd 22-08-2005 10:57 Pagina 36