Boss Audio Systems GT-6 - Manual (Page 9)

9
Names of Things and What They Do
6 MIDDLE Knob
Adjusts the sound quality of the preamp’s midrange.
7 TREBLE Knob
Adjusts the sound quality of the preamp’s high-
frequency range.
8 LEVEL Knob
Adjusts the preamp volume level.
9 SPEAKER Knob
Selects the speaker type.
10 PREAMP/SPEAKER ON/OFF Button
Press to change the setting.
11 TYPE VARIATION Button
Switches the type variation.
■ OVERDRIVE/DISTORTION (p. 27)
12 TYPE Knob
Selects the type of overdrive or distortion.
13 DRIVE Knob
Adjusts the degree of overdrive or distortion.
14 LEVEL Knob
Adjusts the overdrive/distortion volume level.
15 OVERDRIVE/DISTORTION ON/OFF Button
Press to change the settings.
16 TYPE VARIATION Button
Switches the type variation.
■ DELAY (p. 28)
17 FEEDBACK Knob
Adjusts the number of times the delay is repeated.
18 LEVEL Knob
Adjusts the volume level of the delay sound.
19 DELAY ON/OFF Button
Press to change the setting.
20 TAP Button
Use this when setting the delay time with the tap input.
(p. 28)
■ CHORUS (p. 29)
21 LEVEL Knob
Adjusts the volume level of the chorus sound.
The chorus sound increases as the knob is turned to the
right (clockwise).
22 CHORUS ON/OFF Button
Press to change the setting.
■ REVERB (p. 29)
23 LEVEL Knob
Adjusts the volume level of the reverb sound.
24 REVERB ON/OFF Button
Press to change the setting.
■ WAH (p. 30)
25 WAH ON/OFF Button
Press to change the setting.
■ EQ (EQUALIZER) (p. 32)
26 EQ Button
Press when changing the settings.
■ FX-1 (p. 32)
27 FX-1 ON/OFF Button
Press to change the setting.
■ FX-2 (p. 35)
28 FX-2 ON/OFF Button
Press to change the setting.
29 PATCH/VALUE Dial
Use this when switching patches and changing the
values of settings.
30 PARAMETER Buttons
Press to select parameters.
* To jump to the main parameters, hold down one of these
buttons while you press the other. With items for which there
aren’t that many parameters, the GT-6 jumps to the last (or
initial) parameter.