Boss Audio Systems GT-6 - Manual (Page 59)

59
Chapter 7 Convenient Features of the GT-6
Chapter
7
Switching Tuner/Bypass On and
Off with the Number Pedals
If you wish, the GT-6 can also be set so the number pedals
can be used to switch Tuner/Bypass on and off .
1. Press [UTILITY], then press PARAMETER [ ]
[ ] so that “SYS: Pdl Tuner SW” is displayed.
fig.07-13
2. Rotate the PATCH/VALUE dial to turn the switch on.
3. Press [EXIT] to return to the Play screen.
Tuner/Bypass is switched on when you press the pedal
with the same number as the currently selected patch
number. Press the pedal once more to turn it off.
Adjusting the Overall Sound to Match
the Usage Environment (Global)
The GT-6 includes a feature that allows you to change the
overall tone temporarily. This is called the “Global function.”
With the Global function, you can temporarily change your
settings to match those of your equipment and the operating
environment, while leaving the settings in the patches
untouched.
1. Press [UTILITY], then press PARAMETER [ ]
[ ] to display the following screen.
fig.07-14
2. Rotate the PATCH/VALUE dial to change the setting’s
value.
3. Repeat Steps 1 and 2 as needed.
4. Press [EXIT] to return to the Play screen.
Low EQ (Low Equalizer) -20 dB–+20 dB
Adjusts the tone in the low frequencies.
* This adjusts the tone regardless of the equalizer on/off settings
of individual patches.
High EQ (High Equalizer) -20 dB–+20 dB
Adjusts the tone in the high frequencies.
* This adjusts the tone regardless of the individual patch
equalizer on/off settings.
NS Threshold (Noise Suppressor Threshold)
-20 dB–+20 dB
Adjusts the noise suppressor threshold level settings for each
patch in a range from -20 dB to +20 dB.
This adjustment is an effective way to get equivalent output
with each of your guitars when you are connecting more
than one guitar.
* Set to “0 dB” when using this in individual patch settings.
* This has no effect on patches in which the noise suppressor is
turned off.
Switching Tuner/Bypass On and Off with the
CTL Pedal
With the Pedal Assign settings (p. 47), using Quick
Settings to set the pedal setting P08= TUNER allows you
to switch Tuner/Bypass on and off with the CTL pedal.
Switching Tuner/Bypass On and Off by
Lifting Up on the Expression Pedal
When the expression pedal is functioning as a Foot
Volume control, set one of the ASSIGN 1–8 Pedal Assign
settings (p. 49) to one of the following settings.
Target: TUNER On/Off
Target Min: On
Target Max: Off
Source: EXP PEDAL
Mode: Normal
Act. Range Lo: 0
Act. Range Hi: 1–127
With this setting, you can switch on Tuner/Bypass by
drawing back the expression pedal.
Global
Low Equalizer
Global
High Equalizer
Global
Noise Suppressor Threshold
Global
Reverb Level