Boss Audio Systems GT-6 - Manual (Page 10)

10
Names of Things and What They Do
31 EXIT Button
Use this to undo operations.
32 WRITE Button
Press to store settings.
33 EZ TONE Button
Used to search for tones.
34 PEDAL ASSIGN Button
Use this to make settings for the expression pedal and
control pedal.
35 OUTPUT SELECT Button
Allows you to select an output appropriate for the
connected device.
36 TUNER/BYPASS Button
Press to use the tuner and bypass functions.
37 NAME/NS/MASTER Button (p. 45, 46)
Use for naming patches (NAME), setting the noise
suppressor (NS), and making the master settings
(MASTER).
38 UTILITY Button
Use for making settings for the GT-6’s overall operating
environment.
39 MANUAL Button
Press to use the GT-6 in Manual mode.
40 BANK Pedals
These switch the bank number.
41 NUMBER Pedals
These switch the patch numbers.
42 CTL (CONTROL) Pedal
Any one of a number of different functions can be
assigned to this pedal, then be controlled by it. For
example, you could use it to switch the tuner on and off.
43 Expression Pedal
Controls volume, wah, and many other parameters.
When you operate the expression pedal, please be
careful not to get your fingers pinched between the
movable part and the panel.
In households with small children, an adult should
provide supervision until the child is capable of
following all the rules essential for the safe operation of
the unit.
44 EXP PEDAL SW (Expression Pedal Switch)
Firmly press down at the front of the pedal to switch the
effect on and off.
45 EXP PEDAL SW ON/OFF Indicator
(Expression Pedal Switch On/Off)
Lights when the effect being controlled with the
Expression Pedal Switch is on, and goes out when the
effect is turned off.