Boss Audio Systems GT-6 - Manual (Page 56)

56
Chapter 7 Convenient Features of the GT-6
Quick Patch Volume Adjustment
(PATCH LEVEL Knob)
For quick and easy adjustment of the current patch’s volume,
use the PATCH LEVEL knob.
You can turn the PATCH LEVEL knob to control the patch
level of the currently selected patch.
fig.07-01
* The patch level that’s been arrived at using the PATCH
LEVEL knob is saved when the Write procedure (p. 22) is
carried out.
Turning the Effects On and Off
with the Pedals (Manual Mode)
The GT-6 features a Manual mode, in which the pedals are
used for switching specified effects on and off.
In Manual mode, you can switch effects on and off without
changing the patch number.
Switching to Manual Mode
The GT-6 switches Manual mode on or off each time
[MANUAL] is pressed.
When Manual mode is on, the following appears in the
display.
fig.07-02
Selecting the Effect to Be Switched
On and Off With the Pedals
fig.07-03
1. When Manual mode is on, press PARAMETER [ ]
to display the following screen.
fig.07-04
2. Press PARAMETER [ ] [ ] to move the cursor to
the number for the pedal whose settings you want to
change.
3. Rotate the VALUE dial to select the effect to be
assigned to the pedal.
4. Repeat Steps 2 and 3 to select the effects assigned to
each pedal.
2
3
1
Cursor