Boss Audio Systems GT-6 - Manual (Page 35)

35
Chapter 4 The Effects Explained
Chapter
4
Vibrato Depth
This adjusts the depth of the vibrato when the feedbacker is
on.
■ AFB (Anti-feedback)
This prevents the acoustic feedback that can be produced by
the body resonances of a guitar.
Freq1–3 (frequency 1–3)
Set the fixed frequency point at which feedback will be
cancelled.
You can set up to three cancellation points.
Depth1–3
Adjusts the degree of the anti-feedback at each of the three
cancellation points.
■ FRT (Defretter)
This simulates a fretless guitar.
Tone
Adjusts the amount of blurring between the notes.
Sens (sensitivity)
This controls the input sensitivity of the defretter.
Attack
Adjusts the attack of the picking sound.
Depth
This controls the rate of the harmonics.
Resonance
Adds a characteristically resonant quality to the sound.
Effect Level
Adjust the volume of the defretter sound.
Direct Level
Adjust the volume of the direct sound.
FX-2
With FX-2, you can select the effect to be used from the
following.
• PHASER
• FLANGER
• HARMONIST
• PITCH SHIFTER
• PEDAL BEND
• 2x2 CHORUS
• PAN
• VIBRATO
• UNI-V
• SHORT DELAY
• HUMANIZER
• RING MOD (ring modulator)
• SLICER
• AUTO RIFF
• GUITAR SYNTH
• SUB EQUALIZER
Parameter Value
On/Off Off, On
FX Select PH, FL, HR, PS, PB, 2CE, PAN,
VB, UV, SDD, HU, RM, SL, AR,
SYN, SEQ
● PH; Phaser
Type
4stage, 8stage, 12stage,
Bi-Phase
Rate 0–100, BPM –BPM
Depth 0–100
Manual 0–100
Resonance 0–100
Step Off, On
Step Rate 0–100, BPM –BPM
Step= On
Effect Level 0–100
Direct Level 0–100
● FL; Flanger
Rate 0–100, BPM –BPM
Depth 0–100
Manual 0–100
Resonance 0–100
Separation 0–100
Effect Level 0–100
Direct Level 0–100