Boss Audio Systems GT-6 - Manual (Page 55)

55
Chapter 6 Using the Customize Function
Chapter
6
Making “Custom” Pedal Wah
Settings
You can make three different sets of settings, Custom 1,
Custom 2, and Custom 3.
* Any patch tone using Custom 1, 2, or 3 will be altered if the
custom settings are edited.
1. Press [WAH].
The WAH edit screen appears.
2. Press PARAMETER [ ] [ ] to select “FX Select,”
then rotate the PATCH/VALUE dial to select “WAH” or
“FW.”
3. Press PARAMETER [ ] [ ] until “Type”
appears in the display.
4. Rotate the PATCH/VALUE dial to select from
“Custom1–3.”
fig.06-05
5. Press PARAMETER [ ] [ ] to show the custom
parameters.
fig.06-06
6. Rotate the PATCH/VALUE dial to change the setting’s
value.
7. Repeat Steps 3 through 5 as needed.
8. Press [EXIT] to return to the Play screen.
Type
Selects the basic type of wah.
CRY WAH:
This models the sound of the CRY BABY wah pedal popular
in the ‘70s.
VO WAH:
This models the sound of the VOX V846.
Fat WAH:
This a wah sound featuring a bold tone.
Light WAH:
This wah has a refined smooth sound.
7String WAH:
Wah featuring a broader range of variations for the seven-
string guitar.
Q -50–+50
Adjusts the amount of characteristic effect applied to the wah
tone.
Range Low -50–+50
Selects the tone produced when the pedal is back.
Range High -50–+50
Selects the tone produced when the pedal is forward.
Presence -50–+50
Adjusts the tonal quality of the wah effect.
Custom
Type
Custom
Q
Custom
Range Low
Custom
Range High
Custom
Presence