Brother FAX-940 E-mail - Manual (Page 36)

26
C H A P T E R T H R E E
Alternating Displays
The LCD sometimes alternates between the currently selected option,
and a help message giving brief instructions about how to proceed. The
display you’ll probably see most often is shown below, showing you that
when you place a document in the feeder, you can either dial a number to
send it as a fax or press the copy key to make a copy of the document.
FAX: NO. & START
COPY: PRESS COPY
MAIL:PRESS EMAIL
Function Selection Table
If you have a basic understanding of how to program your machine, you
can perform most of the programming settings without the Owner’s
Manual. To help you understand the function selections, options, and
settings that are available, use the Function Selection Table below.
1. INITIAL SETUP
Function Description Factory Set Chapter
1. TONE/PULSE Selects the dialling mode. TONE 4
2. DATE/TIME Enter date and time for LCD -- 4
display and to print on
transmissions.
3. STATION ID Program the name, fax number -- 4
and telephone number to appear
on each transmitted page.
4. BEEPER Adjust the volume level of the LOW 4
beeps when you press a key, an
error occurs or a document is
sent or received.
5. PBX Turn on if PABX (Private OFF 4
Automatic Branch Exchange) is
connected to your machine.
6. CLOCK CHANGE Adjust the machine’s clock by -- 4
one hour for summer/winter
time.