Barco CINE7 R9010050 - Manual (Page 87)

9. Service Mode
9. SERVICE MODE
Overview
• Introduction
• Service Mode Overview
• Projector Set up
• Memory Management
• Common Settings
• I2C Diagnostics
9.1 Introduction
How to start up Service Mode?
1. Push the cursor key ↑ or ↓ to highlight Service and press ENTER to select. (menu 9-1)
The Service menu will be displayed. (menu 9-2)
ADJUSTMENT MODE
Select a path from below :
IRIS
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with ↑ or ↓
then
to return
Menu 9-1
SERVICE MODE
PROJECTOR SET UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with ↑ or ↓
then
to return
Menu 9-2
Some items in the Service mode are password protected (when the password function is active). Enter your
password to continue. All other password protected items are now also available if you stay in the adjustment
mode.
R5976584 BARCO CINE7 26022003 83