Barco CINE7 R9010050 - Manual (Page 40)

6. Main Menu
Changing the scan rate
1. Push the cursor key
↑
or
↓
to select a new scan rate. (menu 6-9)
2. Press ENTER to activate this scan rate.
50Hz Vertical frequency of the image
1250 Lines Quantity of horizontal lines
P = Non Interlaced = Progressive Scan
I = Interlaced
Interlace mode
MULTIPLIER MODE
50Hz 625 lines P
50Hz 935 lines P
100Hz 625 lines P
50Hz 1250 lines P
100Hz 1250 lines I
Select with
↑
or
↓
then
to return
Menu 6-9
6.2.2.3 Motion Processing On/Off
What can be done?
With this function it is possible to recognize whether the source material was originally film or video. That prevents the creation of
motion artifacts.
How to toggle Motion Processing On/Off?
1. Push the cursor key
↑
or
↓
to select Motion Processing. (menu 6-10)
2. Press ENTER to toggle Motion Processing On/Off.
IMAGE PROCESSING
Line Multiplier : ON
Multiplier Mode
Motion Processing : ON
Video Equalizing
Noise Reduction
Contrast Enhancement
Select with ↑ or ↓
then
to return
Menu 6-10
6.2.2.4 Video Equalizing
What can be done?
The sharpness of the image can be adjusted for 3 frequency bands (low, medium and high) separately. In addition to the 7 prepro-
grammed factory presets a customized adjustment of the sharpness for 3 ranges is also possible.
36 R5976584 BARCO CINE7 26022003