Barco CINE7 R9010050 - Manual (Page 81)

8. Random Access Adjustment Mode
Image 8-16
Size adjustment
A Vertical size adjustment
B Horizontal size adjustment
In order to avoid loss of resolution in the projected image and to ensure maximum CRT longevity, do not use
an excessively small size setting.
If the internal # pattern was selected, this pattern remains on the screen, if the genlocked pattern was selected,
the external source will be displayed.
How to adjust the Size?
1. Push the cursor key
↑
or
↓
to highlight Size and press ENTER to select. (menu 8-51)
A bar scale and a numeric indicator will help to gauge the size adjustment. (image 8-17)
2. Push the
←
or
→
keys to adjust the horizontal size until the exact image width is obtained. (image 8-18)
3. Push the ↑ or ↓ keys to adjust the vertical size until the exact image height is obtained. (image 8-19)
4. Press EXIT to return to the Geometry menu.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
SIZE
V LINEARITY
BLANKING
Select with ↑ or ↓
then
to return
Menu 8-51
R5976584 BARCO CINE7 26022003 77