Barco CINE7 R9010050 - Manual (Page 84)

8. Random Access Adjustment Mode
How to adjust the Blanking?
1. Push the cursor key
↑
or
↓
to highlight Blanking and press ENTER to select. (menu 8-53)
The Blanking menu will be displayed. (menu 8-54)
2. Push the cursor key ↑ or ↓ to highlight the desired blanking position and press ENTER to select. (image 8-22)
3. Push the cursor keys to adjust the blanking and press ENTER to confirm.
4. Press EXIT to return to the Geometry menu.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
SIZE
V LINEARITY
BLANKING
Select with ↑ or ↓
then
to return
Menu 8-53
BLANKING
TOP
BOTTOM
LEFT
RIGHT
Select with ↑ or ↓
then
to return
Menu 8-54
Image 8-22
Blanking Adjustments
8.7 Convergence Adjustment
Overview
• Starting Up Convergence
• Convergence Adjustment
8.7.1 Starting Up Convergence
What has to be done?
Convergence adjustments affect both the horizontal and vertical lines of the setup pattern. These adjustments are performed on the
green image first, if green convergence is available, until these lines or straight and then on the red image while superimposed on
the green image and on the blue image while superimposed on the green image. Adjust the red and blue until they exactly match
with the green lines.
80 R5976584 BARCO CINE7 26022003