Barco CINE7 R9010050 - Manual (Page 68)

8. Random Access Adjustment Mode
How to toggle Clamp Gating On/Off?
1. Push the cursor key
↑
or
↓
to highlight Clamp Gating. (menu 8-34)
2. Press ENTER to toggle Clamp Gating On/Off.
Note: Default Clamp Gating is set to Off.
Suggested default settings:
Time Base Correction On
Vertical Sync Reference Indirect
Clamp Gate Off
LINE MULTIPLIER
TIME BASE CORRECTION
LUMINANCE DELAY
V SYNC REF: INDIRECT
CLAMP GATING: OFF
LIMO PLUS OPTIONS
FACTORY PRESET
WARNING: ADVANCED
ADJUSTMENT SHOULD BE
PERFORMED ONLY BY QUALIFIED
PERSONNEL
Select with ↑ or ↓
then
to return
Menu 8-34
8.5.7.10 Limo Pro Options
Overview
• Starting Up Limo Pro Options
• Coring
• LTI
• CTI
8.5.7.10.6 Starting Up Limo Pro Options
When available?
This menu item is only available when the projector is equipped with a line multiplier.
How to start up Limo Pro Options?
1. Push the cursor key
↑
or
↓
to highlight Limo Pro Options and press ENTER to select. (menu 8-35)
The Limo Pro Options menu will be displayed.
LINE MULTIPLIER
TIME BASE CORRECTION
LUMINANCE DELAY
V SYNC REF: INDIRECT
CLAMP GATING: OFF
LIMO PLUS OPTIONS
FACTORY PRESET
WARNING: ADVANCED
ADJUSTMENT SHOULD BE
PERFORMED ONLY BY QUALIFIED
PERSONNEL
Select with
↑
or
↓
then
to return
Menu 8-35
8.5.7.10.7 Coring
What can be done?
With coring, a noise threshold will be set for all filters.
64 R5976584 BARCO CINE7 26022003