Brother 515 - Manual (Page 93)

83
M E S S A G E M A N A G E R ( O N L Y F O R F A X - 5 2 5 D T )
5 Press 9 0 to reset the machine when you finish.
6 Hang up.
If your fax machine is set to MANUAL mode, you can access the
Message Manager remotely by phoning your machine and letting it ring
for about 100 seconds. Your fax machine will answer the phone after 100
seconds of ringing, and you then have 30 seconds to enter your Remote
Access Code.
Changing the Remote Access Code
Enter your Remote Access Code when the machine picks up your call, so
you can access features remotely. The access code is preset to 159 , but
you can change this.
1 Press Menu , 8 , 7 .
2 Enter a three-digit number from 000 to 900. The cannot be
changed. Do not use the same digits that appear in your Remote
Activation or Deactivation Code or Activation Voice Code.
3 Press Set
4 Press Stop to exit.
When you call your machine and enter the Remote Access Code, you
must press the fourth digit (three-digit number plus ).