Brother 515 - Manual (Page 67)

57
S E T U P S E N D
Basic Sending Operations
Contrast
If your document is very light or very dark, you might want to set the
contrast accordingly. Use LIGHT to send a light document. Use DARK
to send a dark document.
1 Insert the document, face down, in the feeder.
2 Press Menu , 3 , 1 .
3 Use Z or X to select AUTO, LIGHT, or DARK.
4 When the screen displays your selection, press Set . The screen
displays:
ACCEPTED
NEXT
1.YES 2.NO
5 Press 2 if you are finished choosing settings, and go to Step 6––
OR––Press 1 if you want to select additional settings. The display
returns to Setup Send menu.
6 Enter a fax number and press Start to send a fax––OR––Press
Copy to make a copy.
Resolution
When you have a document in the feeder, you can use the Resolution
key. Press Resolution continuously until you see your selection on the
screen.
Standard—suitable for most typed documents.
Fine—good for small print; transmits a little slower than standard
resolution.
Super Fine—good for small print or artwork; transmits slower than fine
resolution.
Photo—use when document has varying shades of grey; slow
transmission time.
See
“Multiple
Resolution
Transmission”
in this
chapter