Brother 515 - Manual (Page 92)

82
C H A P T E R N I N E
Programming the Paging Number
1 Press Menu , 8 , 6 .
2 Press Z or X until the screen displays
PAGING
3 Press Set . The screen prompts you to enter your pager number.
PAG#:
ENTER & SET
4 Enter your paging number up to 20 digits. This is the telephone
number which your machine must call.
5 Press Set .
6 Press Stop to exit.
You cannot change a Paging number remotely.
Remote Retrieval
You can call your machine from any touch tone phone (or remote Group
3 fax machine set for tone) and use a Remote Access Code and other
button presses to retrieve voice (and fax) messages. You can also
program and change some settings for your Message Manager.
Using the Remote Access Code
1 Dial your machine phone number from a touch tone phone.
2 When your machine answers and beeps, immediately enter your
Remote Access Code.
3 The machine signals the kinds of messages received:
1 long beep—Fax message(s)
2 long beeps—Voice message(s)
3 long beeps—Fax and Voice message(s)
No beeps—no messages
4 The machine then prompts you with two short beeps to enter a
command. If you wait longer than 30 seconds to enter a command, the
machine hangs up. If you enter an invalid command, the machine
beeps three times.