Brother 515 - Manual (Page 80)

70
C H A P T E R E I G H T
One Touch Dialling
1 Pick up the handset—OR—Press Speaker Phone .
2 When you hear a dial tone, press One Touch key of the location you
want to call.
3 To hang up, replace the handset—OR—Press Speaker Phone .
If you try to use a One Touch location with no number stored in it, you
hear a warning sound, and screen displays NOT ASSIGNED. The
display returns to normal after 2 seconds.
If you are sending a fax, press Start after pressing One Touch key . If
you picked up the handset, press Start when the receiving fax machine
answers with fax tones.
Speed Dialling
1 Pick up the handset—OR—Press Speaker Phone .
2 When you hear a dial tone, press Mute/Speed Dial , then press the
two-digit Speed Dial number.
3 To hang up, replace the handset—OR—Press Speaker Phone .
If you are sending a fax, press Start after entering the Speed Dial
number. If you picked up the handset, press Start when the receiving fax
machine answers with fax tones.
Searching Telephone Index
You can search for names you have stored in One Touch and Speed Dial
memories. Names are stored alphabetically.
1 Press Tel-Index , then enter the first letter of the name you’re looking
for.
2 Press Z or X to search the memory.
3 When the screen displays the name you want to call, pick up the
handset or press
Speaker Phone .
4 Press Start to begin dialing.
5 When the call is over, hang up—OR—Press Speaker Phone to
cancel the call.
See
“Storing One
Touch Dial
Numbers”
chap. 7
See
Storing
“Speed Dial
Numbers”
chap. 7