beautypg.com

Advanced receiving operations, Operation from an external or extension telephone – Brother 515 User Manual

Page 50

background image

40

C H A P T E R F I V E

In case Fax Detect does not work, because of a poor phone line
connection, just press

Start

or press the Activation Code

5

1

.

1

Press

Menu

,

2

,

3

.

2

Use Z or X to select ON, SEMI or OFF.

3

Press

Set

when the screen displays your selection.

4

Press

Stop

to exit.

If you’ve set the feature to ON, but your machine doesn’t automatically
connect a fax call when you lift an external or extension phone handset,
press

5

1

.

At the machine, lift the handset and press

Start

.

Advanced Receiving Operations

Operation from an External or Extension
Telephone

In order to activate the Remote Activation, you should first set

Menu

,

2

,

4

, REMOTE ACT to ON (see Changing Remote Codes) .

If you answer a fax call on an external or extension phone, you can make
your machine take over by using the Activation Code. When you press
the Activation Code

5 1

, the machine starts to receive a fax.

If the machine answers a voice call and F/T pseudo-ring for you to take
over, use the Deactivation Code

#

5

1

to take the call at an extension

phone. The Deactivation Code is used only in F/T mode.

If you answer a call, and no one is on the line, assume you’re receiving a
fax. At the machine phone, press

Start

, then hang up. At an extension

phone, press

5

1

, wait for fax receiving tones (chirps), then hang up.

At an external phone, press

5

1

and wait for the phone to be

disconnected (the screen displays RECEIVE) before you hang up. (Your
caller will have to press

Start

to send the fax.)

If you accidentally pick up an extension phone when a fax message is
being received, you may disrupt the transmission or render some portions
unreadable.

Extension telephones are not pernitted in some countries, in such a case
the deactivation code will not work.

The Remote Activation Code also can be used by your callers. When you
are using an external TAD, your outgoing message (OGM) should end
with the statement “to send a fax, press

5

1

”.

See

“Outgoing

Message

(OGM) of

External

TAD”

chap. 2

See

“Setting the

F/T Ring

Time”
in this

chapter