Brother 515 - Manual (Page 69)

59
S E T U P S E N D
Delayed Transmission (Timer)
You can use this function to send a fax up to 24 hours later.
1 Insert the document in the feeder.
2 You can press Help/Memory to use memory transmission––OR––
leave the document in the feeder to be scanned at the specified time.
3 Press Menu , 3 , 4 .
4 Enter the time you want the fax to be sent, in 24-hour format (for
example, enter 19:45 for 7:45 PM).
5 Press Set . The screen displays
ACCEPTED
NEXT
1.YES 2.NO
6 Press 1 if you want to select additional settings. The display returns
to the Setup Send menu––OR––Press 2 if you are finished choosing
settings and go to Step 7. The screen prompts you to enter the fax
number.
7 Enter the fax number, and press Start . The machine will wait until
the time you have entered to send the fax.
The machine will not start scanning the document until the time it is due
to be sent, so the document must be left in the feeder. (For FAX-515
Only)
Broadcasting (For FAX-525DT Only)
Using the numbers you have stored in Groups, One Touch and Speed
Dial memory, you can “broadcast” faxes automatically to up to 60
different locations in a few simple steps.
1 Insert the document in the feeder.
2 Press Help/Memory . The screen displays how much memory is
available.
3 Enter the One Touch and Speed Dial numbers (one after the other) or
Group Number you have stored.
4 Press Start . The machine stores the document in memory, then
transmits it to all the numbers you entered. If the line is busy, the
machine will retry.
Press Stop during transmission to cancel the current fax broadcast.
See
“Setting Up
Groups for
Broadcasting
(For FAX-
525DT
Only)”
chap. 7