Brother 515 - Manual (Page 81)

71
T E L E P H O N E ( V O I C E ) O P E R A T I O N
Mute
1 Press Mute/Speed Dial to put a call on hold.
2 You can put down the handset without disconnecting the call.
3 Pick up the machine’s handset or press Speaker Phone to release
the call from hold.
Pause
Press Redial/Pause to insert a pause between digits to be dialled.
If your fax machine is connected to a PABX, you may need to insert an
additional number prefix (e.g. “9”) and a “pause” before each fax or
telephone number to gain access to the outside line. When you press
Redial/Pause , a dash “-” will appear on the display. By storing a pause,
you can create a delay of 3.5 seconds.
Tone/Pulse
If you have pulse dialling service, but need to send tone signals (for
telephone banking, for example), follow the directions below. If you have
touch tone service, you do not need this feature to send tone signals.
1 Lift the handset.
2 Press # . Any digits dialled after this sends tone signals.
3 When you hang up, the machine returns to pulse dialling service.
F/T (FAX/TEL) Mode
When you share one line for your telephone and fax machine, in the F/T
(FAX/TEL) mode, the fax machine can determine whether an incoming
call is a fax or a telephone call.
On Hook Dialling
1 Dial the number by using the dial pad or Quick-Dial keys.
2 The number you are dialling, or the name you have stored for One
Touch or Speed Dial is displayed on the LCD.
3 Press Start .
4 Pick up the handset when you hear the other end from the monitor
speaker. If you press
Tel before lifting the handset, the call will be
disconnected (Only for FAX-515).
On the FAX-525DT, you can now speak to the party at the other end
without lifting the handset when you hear the other end from the
speaker. Press
Speaker Phone when you finish the conversation.
See
“Select
Answer
Mode”
chap. 5