Brother 515 - Manual (Page 76)

66
C H A P T E R S E V E N
7 Press Set .
8 Return to Step 2 to store another One Touch dial number—OR—
Press
Stop to exit.
When you dial a One Touch dial number, the screen displays the name
you’ve stored, or, if you haven’t stored a name, the number you’ve
stored.
Storing Speed Dial Numbers
You can store Speed Dial numbers by following the sequence below.
There are 50 Speed Dial locations. Even if you lose electrical power,
numbers stored in memory will not be lost.
1 Press Menu , 6 , 2 . The screen prompts you to enter a location.
SPEED-DIAL? #
2 Use the dial pad to enter a two-digit location (01–50).
3 Press Set . The screen displays your entry, then prompts you to enter
the number you’re storing.
#05:
ENTER & SET
4 Enter the number (up to 20 digits).
5 Press Set . The screen now prompts you to store a name with this
number.
NAME:
6 Use the dial pad to enter the name (up to 15 characters). You can use
the chart on chapter 4 to help you enter letters—OR—Go to Step 7
to store the number without a name.
7 Press Set .
8 The screen prompts you to select the type of number this is.
Use Z or X to select the type you want.
FAX a fax number
TEL a telephone (voice) number
F/T both a fax and telephone number
9 Press Set .
10 Return to Step 2 to store another Speed Dial number—OR—Press
Stop to exit.