Brother 515 - Manual (Page 118)

108
Enter Paging press 3 .
Program Fax Forward Number
press 4 . Enter the new number of
the remote fax machine where
you want your fax messages
forwarded and then press
# # .
Press 9 6 1 after two short beeps,
then enter the number of remote
fax machine, and then
# # to
retrieve Memory Status List.
Retrieve a Fax
Press 9 6
then to Print a Memory Status List press
1 , then enter the number of
remote fax machine, and then # # .
After the beep, hang up and wait.
Retrieve all faxes press 2 , then
enter the number of remote fax
machine, and then
# # . After the
beep, hang up and wait.
Erase all fax messages press 3 .
Changing Remote Access Code
1 Press Menu , 8 , 7 .
2 Enter a three-digit number from 000 to
900. The cannot be changed.
3 Press Set .
4 Press Stop to exit.
Remote Commands
Listen to Voice Messages
Press 9 1
then to Repeat a message press 1 .
Skip to next message press 2 .
Stop playing the message press 9 .
Record a Memo
Press 9 2 .
Wait for the beep, then speak.
then to Stop recording — Press
9 .
4 2 3
Erase All Messages
Press 9 3 . If you hear three beeps, all
messages have not yet been heard, and the
messages will not be erased.
Play/Record Outgoing Message
Press 9 4
then to Play TAD MSG press 1 1 .
Play F/T MSG press 1 2 .
Play PAGING MSG press 1 3 .
Record new TAD MSG press 2 1 ,
then speak after beep. Press 9 to
stop.
Record new F/T MSG press 2 2 ,
then speak after beep. Press 9 to
stop.
Record new PAGING MSG press
2 3 , then speak after beep. Press
9 to stop.
Change Paging/Fax Forwarding Setting
Press 9 5
then to Turn feature off press 1 .
Enter Fax Forwarding press 2 .