Setting the speaker volume, Setting the ring volume – Brother 515 User Manual
Page 42
32
C H A P T E R F O U R
2
Press Z or X to select Summer Time to gain an hour or Winter
time to lose an hour.
3
Press
Set
.
4
Press
1
to change to Winter Time or Summer Time––OR––Press
2
to exit without changing.
Setting the Speaker Volume
You can adjust the speaker volume when your machine has dialled
(onhook dialling) and the line is connected––OR––after pressing
Speaker Phone
(FAX-525DT only). You can turn the volume OFF or
you can select a volume level.
Press
or
to adjust the volume level. The display shows the
setting you are choosing. Each key press changes the volume to the next
setting. The new setting will remain until you change it again.
If you have a FAX-525DT, you can adjust the speaker volume while you
are listening to your OGM (Outgoing Message) and ICMs (incoming
messages).
If you turn the Incoming Recording Monitor OFF (
Menu
,
8
,
5
) on FAX-
525DT, the Speaker for screening calls will be disabled and you will not
be able to hear callers leaving messages. The volume for other operations
can still be controlled using
and
.
Setting the Ring Volume
You can adjust the ring volume when your machine is idle. You can turn
the ring OFF.
Press
or
to adjust the volume level. With each key press, the
machine rings so you can hear the current setting and the display shows
the setting you are choosing. Each key press changes the volume to the
next setting.
The new setting will remain until you change it again.