Barco R9002120 - Manual (Page 43)

Service Mode
7 - 5 5975977 BARCODATA 708 260597
BARCO_logo
The BARCO logo can be added to the image, in overlay or in
background, on any place on the screen.
To add the BARCO logo or to change a setting in the BARCO logo
menu, highlight 'BARCO logo' by pushing the control disk up or down
and press
ENTER to select.
WARNING : Continuous use of the BARCO logo damages the
RED CRT.
The BARCO logo menu will be displayed on the screen. Within this
menu, four toggle settings are available.
Mode [ON/OFF] :
ON : BARCO logo will be displayed on the screen.
To position the logo on the screen, push the control disk up, down,
to the left or to the right until the desired position is reached.
OFF : No BARCO logo displayed on the screen.
Size [SMALL/LARGE] :
SMALL : Small BARCO logo will be displayed if mode is on.
LARGE : Large (double size) BARCO logo will be displayed if
mode is on.
Background [ON/OFF] :
ON : BARCO logo will be displayed on a black background.
BARCO
OFF : BARCO logo will be displayed without any background.
BARCO
Orbiting [ON/OFF] :
ON : on the BARCO logo will orbit around it axis.
OFF : no orbit of the BARCO logo.
Memory management
Highlight 'Memory management' by pushing the control disk up or
down and press ENTER to display the memory management menu.
Within the memory management menu, the following items can be
consultated or executed :
- copy a block
- delete a block
- delete all blocks
- all settings to midposition
- R & B convergence to mid
- Gr convergence mid (only if green convergence is available)
Select with or
then
to return.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
ENTER displays the BARCO logo menu.
EXIT returns to the Service menu
Select with or
to toggle
to return.
BARCO LOGO
MODE : ON
SIZE : SMALL
BACKGROUND : ON
ORBITTING : ON
You can move the logo
on the screen, using
the arrow keys.
WARNING : continuous
use of the BARCO logo
damages the RED CRT !
Select with or
then
to return.
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with or
then
to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID