Bosch 8-Dec - Manual (Page 281)

Detectors and Accessories | Magnetic Contacts Surface Mount | 273
ISN‑CFM‑102 Flange
Mount Contacts with Side
Leads
Features
▶ Closed loop
▶ Flange mount with special adhesive
▶ Side leads
The contacts are available in brown or white. Both models
are flange mountable with special adhesive and have leads
that come from the side of the contact.
Certifications and Approvals
UL and X
Region Certification
Europe CE 73/23/EEC and 93/68/EEC, EN50131:
1997, EN50131-6: 1997, EN60950:
2000, EN60335-1: 1994 +A1: 1996
Annex B
Installation/Configuration Notes
Compatibility Information
All contact models are compatible with control panel
models that accept contact inputs.
Parts Included
Quantity Per Package Component
10 Contacts
10 Magnets
Technical Specifications
Specifications for All Models
Gap Width: 25 mm (1 in.)
Contact Dimensions: 7.62 mm x 33.78 mm x 13.46 mm (0.3
in x 1.33 in. x 0.53 in)
Wire Lead Lengths: 46 cm (18 in.)
Wire Lead Type: 0.8 mm (0.029 in.) 22 AWG,
7 stranded
Switch Configuration Type: Single pole single throw (SPST)
Maximum Contact Resistance: 150 μΩ (micro-ohm)
Minimum Breakdown Voltage: 250 VDC
Insulation Resistance: 10 10 Ω
Electrostatic Cap: 0.3 PF
Contact Capacity: 10 VAC
Maximum Conductive Current: 1.0 A
Maximum Voltage:
100 V
Operating Temperature Range: 7.2°C to -95.56°C (-45°F to -140°F)
Package Information
ATTENTION! Each package contains ten contacts and ten magnets.
Ordering Information
Brown Flange Mount Contact with Side Lea
ds
Brown surface mount contact. Includes a
standard magnet and special adhesive. Pack-
age contains ten contacts and ten magnets.
ISN-CFM-102B
White Flange Mount Contact with Side Lea
ds
White surface mount contact. Includes a stand-
ard magnet and special adhesive. Package
contains ten contacts and ten magnets.
ISN-CFM-102W
www.boschsecurity.com Bosch Security Systems B.V.
5