Pioneer AVIC-F840BT - Manual (Page 74)

You can listen to the radio by using the naviga-
tion system. This section describes operations
for radio (FM).
The functions related to RDS (Radio Data Sys-
tem) are available only in areas with FM sta-
tions broadcasting RDS signals. Even if the
navigation system is receiving an RDS station,
not all the functions related with RDS will be
available.
Starting procedure
1 Display the AV operation screen.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 72.
2 Tap [FM] on the left edge of the screen
to display the
“FM” screen.
3 Use the touch panel keys on the screen
to control the radio.
= For details, refer to Using the touch panel
keys on the next page.
Reading the screen
e
1 2 6 5 7 8 4 3
c
9
a
b
d
1 Band indicator
Shows which band the radio is tuned to: FM1
to FM3.
2 Programme service name indicator
Shows the programme service name (station
name) of the current station.
3 Signal level indicator
4 Frequency indicator
5 STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
6 TEXT indicator
Shows when radio text is received.
7 NEWS indicator
Shows the status of news programmes.
8 TRFC indicator
Shows the status of traffic announcements.
9 Current time
a Programme service name or frequency in-
dicator
Shows the frequency of the preset item. If the
programme service name can be obtained,
the programme service name is shown in-
stead of the frequency.
b Preset number indicator
Shows what preset item has been selected.
c PTY indicator
Shows the programme type of the current sta-
tion (when available).
d Radio text display area
Displays the radio text currently received.
e Source icon
Shows which source has been selected.
Engb
74
Chapter
14 Using the radio (FM)