Pioneer AVIC-F840BT - Manual (Page 18)

4 Pull the SD memory card out straight.
5 Press the h button.
The LCD panel closes.
p When you eject the SD memory card by
touching [ Eject SD], the model information
that you are using will be automatically
stored into the SD memory card.
The utility programme NavGate FEEDS will
use this information to recognise the model
that you use.
When the data related to map data is
stored
p This description is for AVIC-F40BT.
If data related to map data, such as custo-
mised POI data, is stored on the SD memory
card, operating procedures are slightly differ-
ent.
1 Press the h button and then touch
[Eject SD].
2 Touch [Yes].
The navigation system restarts, and then the
LCD panel opens.
3 Eject the SD memory card.
4 Press the h button.
The LCD panel closes.
Inserting an SD memory card (for
AVIC-F940BT and AVIC-F840BT)
% Insert an SD memory card into the SD
card slot.
Insert the SD memory card with the terminal
contacts facing down, and press the card until
it clicks and locks completely.
p If data related to map data, such as custo-
mised POI data, is stored on the SD mem-
ory card, the navigation system restarts.
Ejecting an SD memory card (for
AVIC-F940BT and AVIC-F840BT)
1 Press the h button.
The touch panel keys for ejecting the media
appear.
2 Touch [Eject SD].
A message prompting you to remove the SD
memory card appears.
Engb
18
Chapter
02 Basic operation