Pioneer AVIC-F840BT - Manual (Page 178)

Returning the navigation
system to the default or
factory settings
You can return settings or recorded content to
the default or factory settings. There are some
methods to clear user data, and the situations
and the cleared content are different for each
method. For information regarding the content
that is cleared by each method, see the list
presented later.
Method 1: Remove the vehicle battery
This transforms the system into the same
state as when the navigation system is unin-
stalled.
Method 2: Touch [Restore Factory
Settings]
= For details, refer to Restoring the default set-
ting on this page.
Method 3: Touch [Clear user information]
on the
“Select Items to Reset” screen
= For details, refer to Returning the navigation
system to the initial state on this page.
Method 4: Touch [Reset] on the
“Select
Items to Reset
” screen
= For details, refer to Returning the navigation
system to the initial state on this page.
Restoring the default setting
Resets various settings registered to the navi-
gation system and restores them to the default
or factory settings.
p Be sure to read “Setting items to be deleted”
before you perform this operation.
= For details, refer to Setting items to be
deleted on the next page.
1 Display the “System Settings” screen.
= For details, refer to Displaying the screen for
system settings on page 149.
2 Touch [Restore Factory Settings].
The message confirming whether to restore
the settings appears.
3 Touch [Yes].
Returning the navigation
system to the initial state
You can return settings or recorded content to
the default or factory settings.
p Be sure to read “Setting items to be deleted”
before you perform this operation.
= For details, refer to Setting items to be
deleted on the next page.
1 Park your vehicle in a safe place and
apply the handbrake.
2 Turn the ignition switch off and back
on.
The navigation system restarts, and the splash
screen appears.
3 Press and hold the MODE button and
the TRK (m) button while the splash
screen appears.
p For users of AVIC-F40BT, press the MODE
button and the TRK (c) button.
The
“Select Items to Reset” screen appears.
4 Touch [Clear user information] or
[Reset].
The message confirming whether to erase the
data appears.
5 Touch [Yes].
The recorded contents are cleared.
Engb
178
Chapter
30 Other functions