Pioneer AVIC-F840BT - Manual (Page 169)

2 Touch [HPF].
Each time you touch [ HPF] selects cut-off fre-
quencies in the following order:
Off
— 50Hz — 63Hz — 80Hz — 100Hz —
125Hz
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
p Settings are based on the FM tuner volume
level, which remains unchanged.
p You cannot select [SLA] when the FM tuner
is selected as the AV source.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Display the
“AV Sound Settings”
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 162.
3 Touch [SLA].
4 Touch [+] or [
–] to adjust the source vo-
lume.
“+8dB” to “–8dB” is displayed as the source
volume is increased or decreased.
The following AV sources are set to the same
source level adjustment volume automatically.
! CD, ROM, and DivX
! SD and USB
! Audio (Bluetooth audio) and aha
(Bluetooth connection)
! iPod and aha (iPhone)
! AV1 and AV2
p With the AVIC-F840BT, AV2 is not available.
And AVIC-F840BT shows
“AV Input” as
“AV1 Input”.
p The different source volume level can be set
between iPod and USB.
Enhancing bass (Bass Booster)
You can enhance bass sounds that are often
muted by driving noise.
1 Display the
“AV Sound Settings”
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 162.
2 Touch [Bass Booster].
3 Touch [+] or [
–] to adjust the range from
0 to 6.
Replicating the settings
You can import settings you have made on the
utility programme NavGate FEEDS which is
available separately to the navigation system.
1 Use NavGate FEEDS to replicate the set-
tings and store them on an SD memory
card.
2 Insert an SD memory card into the SD
card slot.
= For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 16.
3 Press the HOME button to display the
“Top Menu” screen.
4 Touch [Settings].
The
“Settings Menu” screen appears.
5 Touch [Setting Replicator].
A message confirming whether to update the
settings appears.
6 Touch [Yes].
Update starts.
After the settings are updated, a message con-
firming whether to restart the navigation sys-
tem appears.
7 Touch [OK].
The navigation system restarts.
Engb
169
Chapter
27
Customising
pr
eferences
Customising preferences