Pioneer AVIC-F840BT - Manual (Page 157)

! iPod: The video and sound of the iPod are
output to the rear display
! AV1: The video and sound of AV1 are out-
put to the rear display
! AV2: The video and sound of AV2 are out-
put to the rear display
p When “Mirror AV” is selected, the following
restrictions are applied to rear display.
— When selecting “Rear View” in the map
display, nothing is displayed.
— All sounds cannot be output for rear dis-
play.
— When playing back video files on the ex-
ternal storage device (USB, SD), the
video image is not output.
p When “DISC” is selected, the following re-
striction is applied to rear display.
— When a CD or MP3/WMA/AAC disc is
set in the built-in DVD drive, only the
sound is output.
p When “iPod” is selected, the following re-
striction is applied to rear display.
— The video image and sound are output
only when the corresponding setting on
“AV1 Input” is “iPod”.
p When “AV1” or “AV2” is selected, the fol-
lowing restrictions are applied to rear dis-
play.
— The video image and sound are output
only when
“AV1” or “AV2” has both
video and sound.
— The video image and sound are output
only when the corresponding setting on
“AV1 Input” or “AV2 Input” are
“Video”.
Adjusting the picture
CAUTION
For safety reasons, you cannot use some of these
navigation functions while your vehicle is in mo-
tion. To enable these functions, you must stop in
a safe place and apply the handbrake. Refer to
Important Information for the User (a separate
manual).
You can adjust the picture for each source and
rear view camera.
1 Press and hold the MODE button.
The
“Picture Adjustment” screen appears.
2 Touch [+] or [ –] to adjust the desired
item.
! Brightness: Adjusts the black intensity.
! Contrast: Adjusts the contrast.
! Colour: Adjusts the colour saturation.
! Colour Temp.: Adjusts the tone of colour
(which colour is emphasised, red or blue).
! Dimmer: Adjusts the brightness of display.
p Touching [Camera] switches to the picture
adjustment screen for the rear view cam-
era.
p Touching [Source] while adjusting the rear
view camera image returns you to the pre-
vious screen.
p The adjustments of “Brightness” and
“Contrast” are stored separately when your
vehicle
’s headlights are off (daytime) and
when your vehicle
’s headlights are on
(nighttime). These are switched automati-
cally depending on whether the vehicle
’s
headlights are on or off.
p The adjustments of “Dimmer” is stored se-
parately when your vehicle
’s headlights are
off (daytime) and when your vehicle
’s head-
lights are on (nighttime).
“Dimmer” is
switched automatically only when the value
of nighttime is lower than the value of day-
time.
p You cannot adjust “Colour” for the source
without a video and navigation map display.
p The setting contents can be memorised se-
parately for the following screen and the
video image.
Engb
157
Chapter
27
Customising
pr
eferences
Customising preferences