Pioneer RCS-656HX - Manual (Page 69)

Using the GUIDE Plus+™ electronic program guide 05
69
En
9 Press to access the extended recording options:
• If you want to record to a particular HDD genre, use
the YELLOW Action button (Genre) to select one.
• Use the GREEN Action button (Timing) to add extra
time to the end of the recording ( +0, +10, +20, +30 or
VPS/PDC 1 ( V–P)).
• Press to display the standard recording options
again.
Deleting a scheduled recording
1 Highlight the left tile of a scheduled recording.
2 Press the RED Action button (Delete).
The scheduled event is deleted.
Setting a ShowView™ recording
1 Select ‘Schedule’ from the Menu bar.
2 Press the RED Action button (ShowView).
3 Use the number buttons to enter a ShowView
programming number.
• If you live in an area not yet covered by the GUIDE
Plus+ system you may also have to input a channel
number. Follow the on-screen display to do this.
4 Press ENTER to confirm.
Note
1 • If you set the timer recording to use VPS/PDC, you must switch the recorder into standby before the timer recording is due to start for it to
work correctly. For non-VPS/PDC timer recordings there is no need to switch the recorder into standby.
• Optimized Recording will not work if VPS/PDC is on.
• Up to 8 timer recordings can be set with VPS/PDC.
• VPS/PDC cannot be set for recordings made from digital broadcasts or an external input, or when the recording mode is set to
AUTO.