Olympus SP-700 - Manual (Page 108)

Setting the date and time in another time zone (DUAL TIME SETUP)
108
6
Setti
ng
s
2
Press ON to set the year, and
press Y to move to the month
setting.
• To move back to the previous setting,
press X.
• The first two digits of the year are fixed.
3
Repeat this procedure until the
date and time are completely set.
• The time is displayed in the 24-hour format. Consequently, 2 p.m. is
displayed as 14:00.
4
Press Z.
• For a more accurate setting, press Z when the time signal hits 00 seconds.
This function allows you to set a date and time in another time zone (dual
time), separate from the settings in [
X]. After setting, you can switch
between the new setting and the time set in [ X].
Top menu [MODE MENU] [SETUP] [DUAL TIME SETUP]
g“Using the menus” (P. 19)
Note
• The date and time settings will be returned to the factory default settings if the
camera is left without the battery for approximately 1 day. The settings will be
canceled more quickly if the battery was only loaded in the camera for a short
time before being removed. Before taking important pictures, check that the
date and time settings are correct.
20 0 5 . 01 . 01
00 : 00
OK SELECT GO SET
Setting the date and time in another time
zone (DUAL TIME SETUP)