AMX UDM-0404 - Manual (Page 60)

Configuration - Schedule Page
48 UDM-0404 4x4 Multi-Format Distribution Hub
Preset Scheduling - Multiple scheduled events can be combined into a single Preset
Schedule. For example, you could create a Preset Schedule that powers up devices 1-4
(connected to the IRTX Ports on the rear panel), then powers up display devices 1-4
(connected to the RJ-45 Output ports on the front panel), and displays Inputs 1-4 on Ports 1-4.
See the Preset Scheduling section on page 55 for details.
Checking the Hub Time
Click on the date and time at the top-right of the Status page to refresh the UDM’s internal clock to the
current time (FIG. 52). This can be useful before creating a scheduled event.
Scheduling IR Device Control Events
Use the Schedule options in the Devices page (bottom toolbar) to create a scheduled IR Device Control
Event (FIG. 53):
1. Select up to two commands to be executed from the 1st and 2nd Control drop-down menus at the
bottom of the Devices page (FIG. 54).
FIG. 52 Hub Date and Time
FIG. 53 Devices page
IR Device Control toolbar