Important instructions, Compliance, Fcc and iec – AMX UDM-0404 User Manual
Page 4: Date of manufacture, Important instructions compliance
Important Safety Markings
b
UDM-0404 4x4 Multi-Format Distribution Hub
Important Instructions
Compliance
FCC and IEC
Compliance with FCC and IEC standards are found within the rating label; see FIG. 2.
Date of Manufacture
For US customers, the date of manufacture is also found underneath the UDM Hub.
This symbol, used within this manual, indicates an important instruction for the
correct and safe installation, operation or maintenance of your UDM Hub.
Failure to comply with such instruction may result in injury to person or damage to the
UDM hardware.
FIG. 3
Date Of Manufacture Sticker (on bottom panel)
UDM-0404/RX02 Date of Manufacture Sticker
Model Number
Model number and designation, comprised of up to seven characters.
Vendor ID
One- or two-character ID code.
Date Code
Three-digit date code, comprised of week of year (1-52) and last digit of year.
Consecutive number
Starting at “0001” and continuing to “9999”.
Model Number
Vendor ID
Date Code (WW/Y)
Consecutive Number (4 digits)