Overview, Configuration - status page – AMX UDM-0404 User Manual
Page 35

Configuration - Status Page
23
UDM-0404 4x4 Multi-Format Distribution Hub
Configuration - Status Page
Overview
The Status page is the initial view when the UDM-0404’s WebConsole is accessed. To access the Status
page from any other Configuration page in the WebConsole, click on the Status link in the navigation
pane (FIG. 15).
All of the system control is handled via options in the Status page. From this page it is possible to
configure each Port:
Specify which Input is displayed on each output Port
Adjust video settings to compensate for cable distance
Send device control messages to display devices
Schedule events
FIG. 15
Main Status page
Click to select
an Input for
each Port
Click to access
Port Configuration options
for each Port
Click to access
User Control options
for each Port