AMX UDM-0404 - Manual (Page 51)

Configuration - Setup Page
39 UDM-0404 4x4 Multi-Format Distribution Hub
Restoring Connections On Power Up
To ensure inputs are transmitted to the outputs (or ports) on boot up select the Restore connections on
power up option (see FIG. 39).
Resetting the UDM-0404
Where appropriate the Hub can be reset from the Browser interface. Use the Setup option to reset the
Hub.
1. Click the Reset Hub button (see FIG. 39).
The UDM-0404’s network connection will be lost temporarily and video displays will switch off
then on again very quickly.
2. Restart the Hub.
A power down of the Hub must be performed to complete the reset procedure.