Xerox WorkCentre PE16-i-4381 - Manual (Page 34)

G ETTING S TARTED 1.17
1
Changing the Display Language and
Country
Setting Language
To change the language that displays on the display of the
control panel, follow these steps:
1 Press Menu until “Machine Setup” appears on the top line
of the display.
2 Press the scroll button ( ¦ or ‹ ) until “Language” appears
on the bottom line of the display.
3 Press Enter. The current setting appears on the bottom
line of the display.
4 Press the scroll button ( ¦ or ‹ ) until the language you
want appears on the display.
5 Press Enter to save the selection.
6 To return to Standby Mode, press Stop/Clear.
Setting Country
1 Press Menu until “Machine Setup” appears on the top line
of the display.
2 Press the scroll button ( ¦ or ‹ ) until “Select Country”
appears on the bottom line of the display.
3 Press Enter. The current setting appears on the bottom
line of the display.
4 Press the scroll button ( ¦ or ‹ ) until your country appears
on the display.
5 Press Enter to save the selection.
6 To return to Standby Mode, press Stop/Clear.
N OTES : Changing the county clears the memory.