Xerox WorkCentre PE16-i-4381 - Manual (Page 118)

T ROUBLESHOOTING 8.11
8
Clearing LCD Error Messages
Display Meaning Suggested solutions
Cancel ?
1:Yes 2:No
Your machine’s memory is
full during the machine
stores the document into
the memory. To cancel the fax job, press the 1
button to accept “Yes.”
If you want to send the pages were
stored, press the
2 button to accept
“No.” You should send the
remaining pages later when the
memory is available.
Comm. Error
The machine has a
communication problem. Ask the sender to try again.
Document Jam
The loaded document has
jammed in the ADF
(Automatic Document
Feeder).
Clear the document jam. See
page 8.2.
Door Open
The front or rear cover is
not securely latched. Close the cover until it locks into
place.
CRU Fuser Error
There is a problem in the
fuser unit.
Unplug the power cord and plug it
back in. If the problem persists,
please call for service.
Heating Error
Open Heat Error
Over Heat
Group Not
Available
You have tried to select a
group location number
where only a single
location number can be
used, such as when
adding locations for a
broadcasting operation. Just use a speed dial number or dial
a number manually using the
number keypad.
Incompatible
The remote machine did
not have the requested
feature, such as a delayed
transmission.
It also occurs if the
remote machine does not
have enough memory
space to complete the
operation you are
attempting.
Reconfirm the remote machine’s
features.
Invalid
Cartridge You have used
unauthorised cartridge. You must use a Xerox approved
cartridge.