Xerox WorkCentre PE16-i-4381 - Manual (Page 139)

S PECIFICATIONS A.6
Paper Specifications
Overview
Your machine accepts a variety of print materials, such as cut-sheet paper (including
up to 100% recycled fiber content paper), envelopes, labels, transparencies and
custom-size paper. Properties, such as weight, composition, grain and moisture
content, are important factors affecting the machine’s performance and the output
quality. Paper that does not meet the guidelines outlined in this user’s guide can
cause the following problems:
• Poor print quality
• Increased paper jams
• Premature wear on the machine.
N OTES :
• Some paper may meet all of the guidelines in this guide and still not produce
satisfactory results. This may be the result of improper handling, unacceptable
temperature and humidity levels, or other variables over which Xerox has no control.
• Before purchasing large quantities of paper, insure the paper meets the requirements
specified in this user’s guide.
C AUTION : Using paper that does not meet these specifications may cause problems,
requiring repairs. These repairs are not covered by the Xerox warranty or service
agreements.
Supported Sizes of Paper
Paper Dimensions
* Weight Capacity
**
Letter
8.5 X 11 in.
(216 X 279 mm)
• 60 to 105 g/m 2
bond (16 to
28 lb) for the
paper tray
• 60 to 120 g/m 2
bond (16 to
32 lb) for the
Bypass tray
• 250 sheets of 75
g/m 2 bond (20 lb)
paper for the
paper tray
• 1 sheet of paper
for the Bypass
tray
A4
210 X 297 mm
(8.3 X 11.7 in.)
Executive
7.25 X 10.5 in. (191 X
267 mm)
Legal
8.5 X 14 in.
(216 X 356 mm)
Folio
216 X 330 mm
(8.5 X 13 in.)