Xerox WorkCentre PE16-i-4381 - Manual (Page 157)

G ETTING S TARTED 1.9
1
Speaker, Ringer, Key Sound and
Alarm Sound
1 Press Menu until “Sound/Volume” appears on the top line
of the display.
2 Press the scroll button ( ¦ or ‹ ) to scroll through the
options. Press Enter when you see the desired sound
option.
3 Press the scroll button ( ¦ or ‹ ) to display the desired
status or loudness for the option you have selected.
You will see the selection on the bottom line of the display.
For the ringer volume, you can select from “Off”, “Low”,
“Med” and “High”. Setting “Off” means that the ringer turns
off. The machine works normally even if the ringer is turned
off.
4 Press Enter to save the selection. The next sound option
appears.
5 If necessary, repeat steps 2 through 4.
6 To return to Standby Mode, press Stop/Clear.
Speaker Volume
1 Press On Hook Dial. A dial tone sounds from the speaker.
2 Press the scroll button ( ¦ or ‹ ) until you hear the loudness
you want. The display shows the current volume level.
3 Press On Hook Dial to save the change and return to
Standby Mode.
N OTE : You can adjust the speaker volume only when the
telephone line is connected.