Xerox DocuColor 240-250 con Xerox FreeFlow DXP250-16166 - Manual (Page 29)

Caveat Applicable printer product
Unable to enter “comments” while creating a
new TRC. All color printers
In “Image Adjustments”, Lightness,
Saturation, and Contrast text boxes are
enabled when Xerox Consistent Color mode
is selected. These should be disabled. All color printers
An error message appears when entering
100,0 or 0,100 for TRC control points. All color printers
In IPDS Manager, the Current Job Setup
changes are not saved. All color printers
Jobs print in serial mode when the
administration pages and Page Parallel RIP
are enabled. In order for jobs to print in
parallel mode, disable the administration
(banner and error) pages. All color printers
DocuPrint CF
The "More Information..." link on the
Associations tab for Color Management
opens a window that displays a scroll bar
only. All color printers
Stock attributes are not displayed correctly by
the IPS Manager if the stock name contains
an "=" character. Do not use the "=" character
in stock names used by the IPS Manager. IGen3
When printing the RDO with Special pages,
the job becomes fault job. IGen3
While IPDS jobs are processing, the
Reposition Output screen is selectable. Do
not use the Reposition Output Screen while
IPDS jobs are processing. IGen3
Changing values in the IPS Manager Printer
Tray list does not result in permanent
changes to the list. The changes are NOT
registered by the IPS Manager. IGen3
Submission of a PPML job causes an error
when printing to a queue with Variable Data
disabled. To recover, select properties on the
queue that the PPML file is submitted to,
under PDL Settings Tab, enable the Variable
Data setting. To avoid this problem leave
Variable Data caching enabled. IGen3
The Diagnostics Call For Assistance screen is
blacked out. Reboot to clear this problem. DocuTech 6180
Unable to launch DocuSP after changing
system date beyond license expiration date. DocuTech 180/155/128 HLC
When the Tray Confirmation value is set to
“None”, the tray confirmation window still
appears when drilled stock is loaded. DC250
Getting Started Guide 23