Adaptec Storage Manager User Manual
Page 87
Chapter 9: Managing Logical Drives and Hot Spares
●
86
An X indicates that the selected disk drive will be removed from the
logical drive, and you are prompted to select another disk drive (of
greater or equal size) to replace it.
6
Modify the Advanced Settings, if required. (See
7
Click Next.
8
Review the new logical drive settings. To make changes, click Back.
Note:
Some operating systems have size limitations for logical
drives. Before you save the configuration, verify that the size of the
logical drive is appropriate for your operating system.
9
To update your logical drive immediately, click Apply, then click Yes.
Flashing arrow prompts you to replace the deselected disk drive