How do i, Set up my storage space, Open the configuration wizard – Adaptec Storage Manager User Manual
Page 158: Turn off the alarm, Add a new user to adaptec storage manager, Add a remote system, Prevent a user from changing my storage space, Check disk drive or logical drive status, Access a feature with a padlock icon beside it, Log out of adaptec storage manager
Appendix B: Quick Answers to Common Questions...
●
157
How do I...?
Set up my storage space?
Follow the five steps in the
Getting Started Checklist on page 23
.
Open the Configuration wizard?
In the Enterprise View, right-click the controller you
want, then click Create logical device. Or, click either
of the buttons shown at right. See
Turn off the alarm?
Click the Silence button, shown at right.
Or, from the menu bar, click Actions, select Alarm actions,
then click Silence alarm. See
Add a new user to Adaptec Storage Manager?
Any user with a valid network user name and password can log into
Adaptec Storage Manager. See
Add a remote system?
Click the Add button, shown at right. See
page 61
.
Prevent a user from changing my storage space?
See
for information on restricting access.
Check disk drive or logical drive status?
Hold your cursor over the disk drive or logical drive to reveal status
information. See also
.
Access a feature with a padlock icon beside it?
Features such as copyback, snapshot, and some RAID levels are
enhanced features that must be unlocked with a special feature key
(sold separately). See
.
Log out of Adaptec Storage Manager?
In the Enterprise View, click on the local system. In the menu bar, select
Actions, then click Log out. See
.
or