Customizing the adaptec storage manager agent, Broadcasting event alerts from a system, Changing a system’s audible alarm settings – Adaptec Storage Manager User Manual
Page 68
Step 5: Customizing Adaptec Storage Manager
●
67
Customizing the Adaptec Storage Manager
Agent
The Adaptec Storage Manager agent’s default settings are suitable for
most storage spaces. (See
for more information about the
agent.) However, you can customize the agent on any system by:
●
Setting the agent to broadcast events on that system to all logged-in
users. See below.
●
Changing the frequency and duration of the alarm, or choose to
disable the alarm for that system. See
●
Changing the operating system event log setting for that system. See
.
●
Changing to agent base port number on that system. See
Any changes you make to the agent settings affect the selected system
only and are not applied to all systems in your storage space.
Broadcasting Event Alerts from a System
You can set the Adaptec Storage Manager agent to send event alerts
about a specific system to all users who are logged into your storage
space network. You might want to do this if your storage space isn’t
managed by a dedicated person, or if that particular system is off-site or
isn’t connected to a monitor.
Event alerts signal to everyone working on the storage space that
technical assistance is required for that system.
For more information, see
Broadcasting Event Alerts to Users on page
.
Changing a System’s Audible Alarm Settings
Warning- and Error-level events on a system (see
) trigger an
audible alarm, a series of beeps which sound every five minutes until
the event is resolved.
You can change the frequency and duration of the alarm, or choose to
disable the alarm on any system. For information about using the
audible alarm, see
.