Silencing and testing the audible alarm, Testing the alarm – Adaptec Storage Manager User Manual
Page 122
Chapter 11: Monitoring Your Storage Space
●
121
Silencing and Testing the Audible Alarm
By default, when a Warning- or Error-level event (see
) occurs
on any system in the Enterprise View, an audible alarm is triggered on
the local system. The alarm is a series of beeps, which sound every five
minutes until the event is resolved.
You can change the frequency and duration of the alarm, or choose to
disable the alarm on any system. See
Changing a System’s Audible Alarm
for more information.
This section describes how to:
●
Ensure the alarm is working on your local system (see below).
●
Silence a sounding alarm (see
).
●
Disable the alarm for a selected controller (see
).
Testing the Alarm
To test the audible alarm to ensure that it’s working on your local
system:
1
Ensure that the speakers on your local system aren’t muted.
2
In the Enterprise View, click on any controller.
3
In the menu bar, click Actions, select Alarm Actions, then click Test
alarm.
The alarm sounds.
4
To stop the test, click OK.