Replacing disk drives in a logical drive – Adaptec Storage Manager User Manual
Page 146
Chapter 15: Managing Controllers and Disk Drives
●
145
Replacing Disk Drives in a Logical Drive
You can replace one or more disk drives in a logical drive. You may want
to do this to upgrade to larger disk drives, or to make disk drive size
uniform across the logical drive.
Caution:
If another disk drive in the logical drive fails during
), you may lose data.
To replace a disk drive in a logical drive:
1
In the Physical Devices View, click the disk drive you want to replace.
2
Set the drive state to failed. (See
3
Remove and replace the disk drive with one of equal or larger size.
4
Wait for the logical drive to rebuild. (See
.)
5
Repeat Steps
for all the disk drives you want to replace.
For information about solving disk drive problems, see
a Disk Drive Failure on page 147
!