Konica Minolta bizhub PRESS C1070 User Manual
Page 96
6-4
6.1
Replenish and Replace Consumables
B
Press [Consumable/Scrap].
C
Press the [Add Stapler] tab of the required saddle stitcher, then follow the on-screen
instructions to replace a staple cartridge.
The number on the right-hand side of the help message indicates a replacement procedure. To display
the next step, press [,].
NOTICE
NOTICE
The Saddle Stitcher SD-506 contains two staple cartridges. Check the message, then be sure to pull out the
empty cartridge.
To remove a staple cartridge, securely hold its right and left sides, and pull it out toward you.
To install a staple cartridge, be careful not to mistake the top side for the bottom side. If the top side is facing
down, the staple cartridge cannot be inserted.
This manual is related to the following products: